Context Navigation

Timeline

22:44 M800 edited by stefan@…: A15 (diff)
21:45 M800 edited by laforge: some more pins on the debug connector (diff)
17:49 serial-log-usbdownloader-menu.txt attached to M800 by stefan@…: Serial log for the USB donwloader and the menu it offers over serial
17:44 serial-log-empire.txt attached to M800 by stefan@…: Serial log during a run through the empire test system
14:06 Ericsson_3.5G_Modem edited by laforge: more details about the modem initialization (diff)
13:58 Ericsson_3.5G_Modem created by laforge: new page about the modem, include binary protocol msgs
13:42 M800 edited by laforge: (diff)
13:41 M800 edited by anonymous: (diff)
12:56 M800 edited by stefan@…: modem is connected to uart0 next to SPI (diff)
02:32 M800 edited by stefan@…: UART2 is shared between GPS and serial console (diff)

21:51 Ticket #26 (Rework mainline Si4700 FM tuner driver for I2C configuration) created by stefan@…: There is a driver for the Si4700 FM tuner chip in mainline …
18:39 Ticket #23 (Power key handling does not work) closed by stefan@…: fixed: That was it indeed. Also added support for the reset key and the headphone …
18:34 Ticket #15 (X load error) closed by stefan@…: fixed: The touchscreen issue should be fixed now. X works fine woth FSO and …
18:30 Ticket #25 (Tool to communicate with the bootloader for flashing, etc) created by stefan@…: We need to reverse engineer the USB protocol used for communication with …

00:16 M800 edited by stefan@…: GPJ configured to 2 means camera interface (diff)

23:27 M800 edited by stefan@…: I2C addresses for cameras (diff)
22:49 M800 edited by stefan@…: FM tuner is on I2C 0x10 (diff)
22:15 M800 edited by stefan@…: Camera I2C address and type still needed (diff)
22:13 M800 edited by stefan@…: Camera toggling GPIO session (diff)
22:00 M800 edited by stefan@…: Camera GPIOs (diff)
20:54 M800 edited by stefan@…: Add headjack and reset EINT, fix power button (diff)
20:10 M800 edited by stefan@…: Headphonejack GPIO (diff)
19:02 M800 edited by anonymous: formatting (diff)

01:30 Ticket #24 (Jack input event handling needs to get finished.) created by stefan@…: There is already code in m800-button.c for the debounce handling and …
01:29 Ticket #23 (Power key handling does not work) created by stefan@…: The power is handled by m800-button.c, like camera, record and slide. The …
01:14 Project_Status edited by stefan@…: NAND read should already work, write support missing (diff)
01:10 Project_Status edited by stefan@…: Keys are either GPIO or CPLD based. Only power does not work for me so … (diff)
00:59 Ticket #22 (Camera support is missing) created by stefan@…: We don't know yet what CMOS sensors are used for the back and the front …
00:08 Project_Status edited by stefan@…: ok, all LEDs are working (diff)

23:59 Project_Status edited by stefan@…: We have physical keys and capsense ones on M800 (diff)
23:45 Project_Status edited by stefan@…: led and vibrator are better supported already (diff)
23:08 Project_Status created by stefan@…: First idea of a project status table

13:24 Ticket #21 (Touchscreen does not probably work) created by morphis: In the current git head (rev b6c6b3776c1fb1d60d3fdef25f8536b615432c20) the …
10:10 Ticket #20 (uayrjytp) closed by stefan@…: invalid: SPAM
02:20 Ticket #20 (uayrjytp) created by uayrjytp: [URL=http://kbtxqkby.com]rmqtqhch[/URL] <a …
01:24 Qemu edited by Kek: (diff)
01:14 Qemu edited by Kek: (diff)

06:42 Ticket #19 (wuebedqo) created by wuebedqo: ekucxhjh http://bpvnrhyp.com avfdcwgk cgtsctwm …

Note: See TracTimeline for information about the timeline view.